Router Issues & Bugs Blog

ver1.24RU, 2010/07/06
Checksum:0x042C6F95
Problems Resolved:
1.Fixed Unexpecter reboot when try to get access to webUi

ver1.24RU, 2010/06/29,
Checksum:0x042BAC69
Problems Resolved:
1.Branch from DIR-628WWv1.24B06 for D-LINK PP request.

ver1.24WW, build 06 Beta, 2010/06/18
Checksum:0x042D1781
Problems Resolved:
1. Fixed PPTP disconnects.

ver1.24WWb02, 2010/04/13
Checksum: 0x042AD928
Problems Resolved:
1. supporting 12/24 time format.

ver1.24WWb01, 2010/04/12
Checksum: 0x042B4E6B
Problems Resolved:
1. supporting 12/24 time format.
2. Internet Usage Meter Widget support(2^64).
3. ¾×Set/Get command of HNAP
4. DWM-152/156 v1.04 driver support

ver1.23WWb01, 2010/01/22
Checksum: 0x0429DCEB
Problems Resolved:
1. fix HNAP security bug.

ver1.20WWb12, 2009/12/3
Checksum: 0x042B8A53
Problems Resolved:
1. multicast streaming HD video to wireless, cause system reboot.

ver1.20WWb11, 2009/11/25
Checksum: 0x042AE971
Problems Resolved:
1. webfilter: www.google.com and http://www.google.com are same, should popup warning
2. L2TP: can not connect to linux L2TP server, DFl1600
3. BT ping loss
4. remove Russia Dialup: Russia PPTP and PPPoE (request by DLink)
5. Virtual server popup port wanring, should translate the message when DUT is in another language mode

ver1.20WWb10, 2009/10/30
Checksum: 0x042BD1ED
Problems Resolved:
1. reboot, or can not browse DUT’s web page, if upgrade from 1.20WWb01 to b07/b08 or b07/b08 to 01

ver1.20WWb09Beta, 2009/10/30
Checksum: 0x042BC9F5
Problems Resolved:
3. reboot, or can not browse DUT’s web page, if upgrade from 1.20WWb01 to b07/b08 or b07/b08 to 01

ver1.20WWb07Beta, 2009/10/29
Checksum: 0x042BB781
Problems Resolved:
1. remove daylight saving end_date must be greater than start_date.

V 1.20WW, build 06, 2009/08/26
Checksum: 0x042D50DA
Problems Resolved:
1. Fix Russia PPPoE allow gateway ip is 0.0.0.0
2. Fix nothing has changed, it should not appear reboot needed page / it also appear at language change.
Step 1 : Restore to default
Step 2 : Change to “QoS Engine” page, and click “Save Settings”. It will appear warning message.
Step 3 : Click OK button in warning message. (Nothing has changed. Save anyway?)
Setp 4 : Appear “Reboot needed page”. But the “Reboot needed page” should be not needed.
PS. This issue appears at “Application Rules” and “QoS Engine” pages.
PS. When change language at “Application Rules” and “QoS Engine” pages. It should not appear “Reboot needed” page.
3. Fix Reboot Needed page appears at the wrong time.
Step 1 : Set one Application rule. And click “Save settings” button.
Step 2 : Appear reboot options. Click “Reboot Later”.
Step 3 : Change to “Syslog” setting page. Enable syslog function and click “Save Settings” button.
UI can’t appear “Reboot Needed page” again. But all setting functions can work.
Step 4 : Go back to “QoS Engine” settings page. And click “Save Settings” button.
It appear “Nothing has changed..” message, but it displayed “Reboot Needed” page.
PS. The “Application Rules” and “QoS Engine” page have the same issue.

V 1.20WW, build 05, 2009/08/21
Checksum: 0x042B9476
Problems Resolved:
1. Auto Measured Uplink Speed issue
Step 1 : Restore to Default.
Step 2 : WAN Port Link to network.
Step 3 : Change to other languages. (Ex. Trad. Chinese).
Step 4 : Auto measured uplink speed message should be in correct language.
It should be not in English.
2. Fix when change Router IP and Device Name at the same time causes warning message.
3. Fix DHCP IP pool range issue.
Step 1 : Restore to Default.
Step 2 : Change DUT IP and Subnet Mask to : 10.11.12.1 / 255.0.0.0 (This IP range is same as 10.0.0.100~10.0.0.199)
Step 3 : Change back to default IP and Subnet Mask: 192.168.0.1 / 255.255.255.0 (This IP range should be as 192.168.0.100 ~ 192.168.0.199)
Step 4 : But it change to 192.168.0.1 ~ 192.168.0.254.
4. Fix E-mail settings and Firmware Upgrade Notification Options issue.
Step 1 : Restore to Default.
Step 2 : Set up E-mail settings and enable this function.
Step 3 : Enable “Email Notification of Newer Firmware Version” function.
Step 4 : Disable E-mail settings function, it should appear warning message.
5. Fix when MTU value setting is 99999, WAN Dynamic IP and Static IP MTU value can’t be checked.
But when MTU value setting is 1501, it will appear warning message.
6. Fix Configure ¡§Shared WEP¡¨ key security while ¡§WPS¡¨ is enabled will cause a warning message. Incorrect Language in Wireless Manual setup.
7. Fix Access control with port filter issue:
if select “any” can’t set prot start to end
8. The ¡§Server name / IP¡¨ field for Russia PPTP should avoid user to input illegal IP, for example: blank.
8. Fix metric field of Routing page when the Metric inputed 256~99999, it doesn’t appear warning message.
10. Russia PPPoE issue:
DUT reboots continually issue with Russia PPPoE Test Procedure:
Step 1. My Internet Connection is “Russia PPPoE”, Address Mode: “Dynamic IP”.
Step 2. To enter the information provided such as “Username”, “Password”.
Step 3. WAN Physical Setting –> Address Mode: “Static IP”.
Step 4. Do NOT enter any settings –> “Save Settings” –> “Reboot Now”.
Test Result:
The DUT reboots continually.
11. Fix when wireless client set to static IP, it can’t display IP address at wireless page of status page.

V 1.20WW, build 04, 2009/07/20
Checksum: 0x042C54C8
Problems Resolved:
1. Secondary WINS IP address can be set to 192.168.0.255
2. Incorrect Language of “Warning Message”
Step 1 : Change Language
Step 2 : Set WAN type to “PPPoE”.
Step 3 : Enter different Password into both “Password” and “Confirm Password” fields, the warning message will show in “English”

V 1.20WW, build 03, 2009/07/17
Checksum: 0x042C710D
Problems Resolved:
1. Secondary WINS IP address can be set to 192.168.0.255
2. Incorrect Language of “Warning Message”
Step 1 : Change Language
Step 2 : Set WAN type to “PPPoE”.
Step 3 : Enter different Password into both “Password” and “Confirm Password” fields, the warning message will show in “English”

7 Fixed When set 3G mode,QoS GUI need to disable.8.Fixed 3G log have garbage characters.
9.Fixed Loss language box.
Step 1 : Restore factory default
Step 2 : Log in DUT WEB page
Step 3 : Close WEB page
Step 4 : OPEN DUT Log in WEB page
Step 5 : Loss Language box
10.Remove Guest Zone field at Status Page.
11.Incorrect Language of “Warning Message”
Step 1 : Change Language
Step 2 : Set WAN type to “PPPoE”.
Step 3 : Enter different Password into both “Password” and “Confirm Password” fields, the warning message will show in “English”
12. 3G country and ISP list update.
13. Fix Time Zone-Newfoundland error in i18n,if set Newfoundland time zone,it should be GMT – 03:30.

V 1.20WW, build 02, 2009/07/15
Checksum: 0x042B9FA5
Problems Resolved:
1. Fixed Using wireless client to configure Access Control rules,cause DUT reboot.
2. Fixed upnp bug. The upnp port will be closed for a short time.
3. Fixed QRS issue, can’t set up wireless setting.
4. Fixed Router DHCP IP range would be set 192.168.0.1 to 192.168.0.254 after running QRS.
5. Fixed WINS Server field can not be cleared by “Del” or “Back Space” key in UI Basic/Network.
6. Fixed DWM-152 don’t connect ,if using DWM-152 tool quick connection

V 1.20WW, build 01, 2009/06/05
Checksum: 0x042BDBF0
Problems Resolved:
1. Fix potential security leak with CAPTCHA.
2. Add Advanced DNS.
3. Fix When DCC set dns = 0.0.0.0,router don’t force setting dns ip.
4. Update chklst.txt(add HW Ver and Channel list follow Chklst.txt Format for MP)
5. Add primary and secondary DNS server GUI in 3G setting When Enable Advanced DNS server.
6. Modify the turn from “Network USB” to “Shareport” in the option of “My USB Type is:”
7. Support DWM-152/156.
8. Update kcodes lib to support USB utility v0.97 for apple/mac.
10. XML Agent 1.08
11. Default disable CAPTCHA

V 1.13WW, build 10, 2008/12/30
Checksum: 0x042B7E84
Problems Resolved:
1. Fixed after change the wan ip to different subnet,can not load before subnet of the configuration file

V 1.13WW, build 09, 2008/12/26
Checksum: 0x042B96D9
Problems Resolved:
1. Fixed non-plug 3G adapter,select status/device_info.shtml,DUT reboot

V 1.13WW, build 08, 2008/12/26
Checksum: 0x042A6625
Problems Resolved:
1. Fixed sometime upload configuration fail, when static routing rule include WAN-PHY and WAN both.

V 1.13WW, build 07, 2008/12/25, by Vic
Checksum: 0x042BABCC
Problems Resolved:
1. Fixed configuration uploads fail, when configuration include Russia static routing rule.

V 1.13WW, build 06, 2008/12/15
Checksum: 0x042D0FD7
Problems Resolved:
1. Fix configure routing table in WAN (Physical) port later , plug and configure 3G adapter will cause DUT reboot
2. Fix WCN ok and then remove USB , router reboot issue
3. Fix restore default can not reset router system time
4. When configure 3G adapter ,advanced/routing page don¡¦t configure again
5. Fix Press Disconnect buttion in status page,the DNS is not released
6. Modify 5G band wireless channel 165 only show on 802.11a only mode
7. Fixed add routing rule fail when PPTP Established in Russia mode.
8.Fixed display error in status page, when WAN mode is Russia PPTP and PPPoE
9.3G MTU modify form 1400 to 1492
10. Fix 3G virtual server, set in port 80 and using chunghua telecom 114.x.x.x,connection fail

V 1.13WW, build 05, 2008/11/05
Checksum:0x042CBA07
Problems Resolved:
1. Fixed router crash bug, when pptp server setting 0.0.0.0 and apply setting in Russia PPTP mode.

V 1.13WW, build 04, 2008/10/23
Checksum:0x042BF654
Problems Resolved:
1. Fix ZIPB bug
2. Fix Wi-Fi protect issue(TSD-repotr-11)
3. Fix Access control don’t work
4. When Change application rules Setting can be reboot
5. When enable application rules and set traffic type to ‘both’ then we diable this rule,auto change to default setting ‘tcp’(TSD-report-1)

V 1.13WW, build 03, 2008/10/07
Checksum:0x042D0B4E
Problems Resolved:
1. Fixed Setting Metric not 1 caused static routing fail in Russia Dual Access Mode.

V 1.13WW, build 02, 2008/10/06
Checksum:0x042D4A79
Problems Resolved:
1. Fixed D-Track Bug Add route rule fail when 10.0.0.0 mask 255.0.0.0 gw 10.10.254.1 (gw and ip at same network segement).

V 1.13WW, build 01, 2008/10/01
Checksum: 0x042D8012
Problems Resolved:
1. PPPOE PPTP L2TP password default is “”
2. Fix when delete schedule rules ,wireless setting schedule don¡¦t back default value ¡§always¡¨
3. Supply kcodes USB utility v0.94
4. Fix grammar bug by changing to “Please set the Network USB Detection interval time, …”
5. Add “Canada” and “USA” For 3G USB Adapter Country